HP (Hewlett-Packard) T1200 Manual De Usuario

PDL Error: Job clipped

The image is too large for the paper or for the printer. Load
larger paper if possible, or reduce the image size.

PDL Error: memory full

Restart the printer and try resending the job; if necessary,
reduce the complexity of the job.

PDL Error: out of paper

Load more paper.

PDL Error: parsing error

The print job is unintelligible to the printer. Try to recreate
and resend it. Check your cable connections.

PDL Error: print mode error

The paper type or print quality specified for the job are
incorrect. Change the loaded paper type or the print settings.

PDL Error: printing error

Try sending the job again.

PDL Error: virtual memory full

Restart the printer and try resending the job; if necessary,
reduce the complexity of the job.

Printhead alignment error: paper too small

Unload paper and load larger paper.

Replace [color] cartridge

Replace the cartridge. See 

Reseat [color] cartridge

Remove and reinsert the same cartridge. See 

.

Update: failed. Invalid file

Make sure that you have selected the correct firmware
update file. Then try again to perform the update.

01.0, 01.1, 01.2

Restart the printer. If the problem persists, contact HP Support. See 

.

21, 21.1, 22.0, 22.1, 22.2,
22.3, 24

Restart the printer. If the problem persists, contact HP Support. See 

.

61:01

The file format is wrong and the printer cannot process the job. Check the graphic language
setting of your printer (see 

). If you are

sending PostScript from Mac OS over a USB connection, select ASCII encoding in both the
driver and the application. Check for the latest firmware and driver releases.

62, 63, 64, 65, 67

Update your printer's firmware. See 

.

71.04

Out of memory. To avoid this, in the HP-GL/2 and HP RTL driver select the Advanced tab
and then Send job as a bitmap.

74.1

Try the firmware update again. Do not try to use your computer while the update is in
progress. If the problem persists, contact HP Support. See 

.

79:03

Restart the printer. If the problem persists, contact HP Support. See 

.

79:04

Update your printer's firmware. See 

.

81:01, 86:01

Please follow the instructions on the front panel. You may be asked to run a test procedure
and write down a numeric code before contacting HP Support. See 

.

94, 94.1

Restart color calibration. See 

178 Chapter 19   Front-panel error messages

ENWW