JVC KD-HDR50 Manual De Usuario
ENGLISH
14
For Bluetooth operations, it is required to connect the
Bluetooth adapter (KS-BTA200) (not supplied) to the
CD changer jack on the rear of this unit.
• Refer also to the instructions supplied with the
Bluetooth adapter (KS-BTA200) (not supplied) to the
CD changer jack on the rear of this unit.
• Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check
the countries where you may use the Bluetooth ®
function.
function.
To use a Bluetooth device through the unit (“BT PHONE”
and “BT AUDIO”) for the first time, you need to establish
Bluetooth wireless connection between the unit and
the device.
• Once the connection is established, it is registered in
and “BT AUDIO”) for the first time, you need to establish
Bluetooth wireless connection between the unit and
the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
can be registered in total.
• Only one device can be connected at a time for each
source (“BT PHONE” and “BT AUDIO”).
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select “BT PHONE” or “BT AUDIO” as the source to
to register and establish the connection with a device.
• Select “BT PHONE” or “BT AUDIO” as the source to
operate the Bluetooth menu.
OPEN
Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
SEARCH
Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating
the unit.
Bluetooth connection.
Connection is established by operating
the unit.
Using the Bluetooth ® devices
Registering using “OPEN”
Preparation: Operate the device to turn on its
Bluetooth function.
Bluetooth function.
1
Select “BT PHONE” or “BT AUDIO.”
2
Select “NEW DEVICE.”
3
Select “OPEN.”
4
Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
– Some devices have their own PIN code. Enter
– Some devices have their own PIN code. Enter
the specified PIN code to the unit.
1 Move to the next (or previous) number
position.
2 Select a number.
3 Repeat steps 1 and 2 until you finish
entering a PIN code.
4 Confirm the entry.
“OPEN..” flashes on the display.
[Turn]
See page 35 about warning messages for Bluetooth
operations.
operations.
KD-HDR50[J]8.indb 14
KD-HDR50[J]8.indb 14
08.11.28 10:22:28 AM
08.11.28 10:22:28 AM