GCC Printers 16 Manual De Usuario

GCC Elite Color 16 Series User’s Guide
Interface Menu

Interpreter:
Auto Switch
PCL
PostScript 3

Format:
Raw
Normal 
Binary

Network Channel:
Netware On
DEC LAT On
AppleTalk On
TCP/IP On

Network Address:
(factory set)

IP Address:
(user-specified)

Subnet Mask:
(user-specified)

Default Router:
(user-specified)

LPD Banner:
On
Off

DHCP:
On
Off

Netware Frame:
Auto-Sense, 
802.3, 
Ethernet II, 
802.2 SNAP, 
802.2, 

Delay Out Close:
Off
On

This submenu allows you to set up the Ethernet 
Network interface. 

Interpreter determines whether the Ethernet port 
will accept only PCL jobs, only PostScript jobs, or 
both (Auto Switch).

Format sets the default data format mode for the 
Ethernet port.

Network Channel sets the individual network 
protocols on or off.

Network Address displays the factory-set network 
address (informational only, cannot be changed).

IP Address allows an IP address to be assigned to 
the printer.

Subnet Mask allows a subnet mask to be assigned 
to the printer.

Default Router allows a default network router 
address to be assigned to the printer.

LPD Banner controls whether the printer sends 
banner information along with LPD print jobs.

DHCP sets whether the printer will obtain its IP 
address from a DHCP server or not.

Netware Frame sets the Netware frame type.

Delay Out Close determines whether the printer 
immediately closes communication with the 
computer after the job is transmitted, or waits until 
the job is processed to do so.