IBM 6500 Manual De Usuario
Windows Me or 9x Host Setup
133
6.
Continue searching the network until you see the Ethernet
Interface name, “P_xxxxxx” or “M_xxxxxx”, where “xxxxxx”
equals the last six digits of the print server Ethernet address
found when a configuration is printed.
Interface name, “P_xxxxxx” or “M_xxxxxx”, where “xxxxxx”
equals the last six digits of the print server Ethernet address
found when a configuration is printed.
7.
Once you see the Ethernet Interface, double click it to display a
list of predefined destinations/queues from which to choose.
list of predefined destinations/queues from which to choose.
8.
Select a destination/queue that will use d1prn.
9.
Click OK once you have selected a destination. The network
path window reappears with the path filled in.
path window reappears with the path filled in.
10. Click Next.
11. Select the appropriate print driver and click Next.
12. Fill in a name for this new network printer at the next window
and decide if you want this to be the default printer. This printer
name can be anything you would like as long as it is unique.
name can be anything you would like as long as it is unique.
13. When prompted for a test page, select either Yes or No
depending on the state of the attached printer, and click Finish.
NOTE: Windows may ask for a disk or CD-ROM to load the
appropriate printer driver to complete this new printer
setup.
setup.
There should now be a new printer icon within the “Printers” folder.
This new network printer relies on NetBIOS over TCP/IP as the
underlying protocol to print to the Ethernet Interface.
This new network printer relies on NetBIOS over TCP/IP as the
underlying protocol to print to the Ethernet Interface.