GCC Printers 21 Series Manual De Usuario

4-6

1.

Go to the Start menu of Windows 2000,
then up to Settings and select Printers. In
the Printers window, double-click the Add
Printer icon to start the Add Printer Wizard. 

Click “Next” at the Add Printer Wizard
welcome screen.

2.

The next window of the Add Printer Wizard
will ask if the printer is connected to the
local computer or to a Network Printer
Server.

Select “Local Printer” unless the printer that
you are selecting is attached to another PC
or accessed via an NT or 2000 server.  De-
select the box marked “Automatically detect
and install my Plug and Play printer.” Click
Next.

Note: If setting up the printer as a stand-
alone Ethernet network device, select
“Local Printer” at this point and install the
driver as if the printer were connected to
the parallel (LPT1:) port of the PC. After the
installation, refer to the Windows 2000
section of Chapter 7 of this manual
(Networking the Elite 21 Series Printer) for
instructions on configuring the printer as a
network device.