GCC Printers 21 Series Manual De Usuario
1-40
Step 11. Verify Printer Setup
In order to verify that the printer has been set up properly, we recommend
sending a simple print job from the computer to the printer. To do this, make
sure that the Elite 21 printer is selected as the default printer on your computer,
as follows:
sending a simple print job from the computer to the printer. To do this, make
sure that the Elite 21 printer is selected as the default printer on your computer,
as follows:
Macintosh: Single-click the printer’s icon on the Desktop. Go to the Printing
menu, then down to “Set Default Printer.”
menu, then down to “Set Default Printer.”
Windows (all versions): Go to Start, then Settings, then Printers. Right-click the
icon for the printer. Select “Set as Default” from the list.
icon for the printer. Select “Set as Default” from the list.
Once the printer is selected, open an application on the computer (such as
SimpleText on the Mac or NotePad in Windows) and create a simple file. Go to
File and then to Print to print the job.
SimpleText on the Mac or NotePad in Windows) and create a simple file. Go to
File and then to Print to print the job.
If the job prints, installation is complete. If the job fails to print, confirm that
Steps 1-10 in this manual have been performed correctly. If the printer still will
not print, repeat steps 1 -10. If you still have difficulty getting a document to
print, contact GCC Technical Support by phone at (781) 276-8620 (North
America only; outside North America, refer to the back cover) or
Steps 1-10 in this manual have been performed correctly. If the printer still will
not print, repeat steps 1 -10. If you still have difficulty getting a document to
print, contact GCC Technical Support by phone at (781) 276-8620 (North
America only; outside North America, refer to the back cover) or
or contact your authorized GCC dealer.