GCC Printers 21 Series Manual De Usuario
3-2
Software Installation
The software required to set up your Windows 95/98 computer is located on the
Elite 21 Series CD-ROM.
Elite 21 Series CD-ROM.
You can install the Elite 21 software on your computer using Plug and Play. This
will work if you are installing the software on a computer which is connected to
the printer through the parallel or USB (Win98 only) port.
will work if you are installing the software on a computer which is connected to
the printer through the parallel or USB (Win98 only) port.
If the printer is not connected to the computer through the parallel or USB port,
go to the “Using Add Printer” section immediately following Plug and Play
instructions.
go to the “Using Add Printer” section immediately following Plug and Play
instructions.
USB connection of the printer is not supported under Windows 95. If installing
the printer over USB using Windows 98, follow the USB Monitor Installation
instructions on the next page before attaching the USB cable and proceeding to
either the Plug and Play or Add Printer Wizard installation steps.
the printer over USB using Windows 98, follow the USB Monitor Installation
instructions on the next page before attaching the USB cable and proceeding to
either the Plug and Play or Add Printer Wizard installation steps.
Windows 95/98 uses a Wizard to help you install printer software. A Wizard is a
series of dialog boxes. In each dialog box you make configuration choices then
click the Next button to move to the next dialog box.
series of dialog boxes. In each dialog box you make configuration choices then
click the Next button to move to the next dialog box.
Part of the software you will need is contained on the Windows 95/98 CD-ROM
or floppy disks. Please have this software available when doing the installation.
or floppy disks. Please have this software available when doing the installation.
Note: These instructions cover installing the Elite 21 as a local printer
(connected via a parallel or serial port) on a Windows 95/98 PC.
(connected via a parallel or serial port) on a Windows 95/98 PC.
If installing the printer as a stand-alone Ethernet device on a Windows network,
we recommend following these instructions as if the printer were being installed
as a local device on LPT1:. Once the installation is complete, proceed to the
Windows 95/98 section of Chapter 7 of this manual (Networking the Elite 21
Printer) for instructions for setting up the printer as an Ethernet network device.
we recommend following these instructions as if the printer were being installed
as a local device on LPT1:. Once the installation is complete, proceed to the
Windows 95/98 section of Chapter 7 of this manual (Networking the Elite 21
Printer) for instructions for setting up the printer as an Ethernet network device.