Zebra Technologies P1043301-005 Manual De Usuario

Support

11/21/13

P1043301-005 

A supported third-party PCMCIA, Compact Flash™, or CardBus wireless radio card is 

required for the printer to connect to the WLAN. After the wireless option board is installed in 
the printer, the wireless radio card inserts into a slot on this board. A wireless radio card is 
NOT provided with the ZebraNet Wireless Print Server or the ZebraNet Wireless Plus Print 
Server. 

The following wireless radio cards are supported at the time of this release:

• Spectrum24

 Compact Flash wireless radio card LA-4137-1020-WW (the card uses an 

adapter and must have firmware version F3.91-69 or later)

For instructions on how to install this card and the adapter, see 

.

• 802.11b Spectrum24 High Rate Direct Sequence PN:LA-4121-1000-US (card must have 

firmware version V2.90-58 or later)

• 802.11b Spectrum24 High Rate Direct Sequence PN:LA-4121-1020-US (card must have 

firmware version V2.90-58 or later)

• 802.11b Spectrum24 High Rate Direct Sequence PN:LA-4121-1120-US (card must have 

firmware version V2.90-58 or later)

Note • This section applies only to the ZebraNet Wireless Print Server and the ZebraNet 
Wireless Plus Print Server. All other Zebranet wireless print servers have a built-in radio.

Some wireless radio cards listed here may not support all ZebraNet wireless print server 
features. 

you wish to use supports the wireless security type used on your WLAN.

Some wireless radio cards may require specific firmware versions to support certain 
features. You may be able to download new firmware to your wireless radio card. Check 
with the card manufacturer for more information.

Check the operating conditions (such as temperature and humidity) for the wireless radio 
card that you choose. If the card has more restrictions than the printer, this may limit the 
conditions under which you can operate the printer with a wireless connection.