Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Zebra Technologies
  4. P1043301-005
  5. Manual De Usuario

Zebra Technologies P1043301-005 Manual De Usuario

Descargar
Página de 164
Getting Started
Printing a Network Configuration Label — Internal ZebraNet 10/100 Print Server and Wireless Print Servers
46
P1043301-005  
11/21/13
Printing a Network Configuration Label — Internal 
ZebraNet 10/100 Print Server and Wireless Print 
Servers
Before you begin, you need to get information from the internal ZebraNet 10/100 Print Server 
network configuration label.
Server network configuration label with different DPI printheads.
To print an internal ZebraNet 10/100 Print Server and wireless print servers 
network configuration label, complete these steps:
1.
Which printer do you have?
Table 9 • Label Width
DPI
Inches
MM
600
1.25
31.75
300
2.50
63.50
200
3.69
93.73
If you have a…
Then…
ZM400 and ZM600
a.
Turn on (I)
 
the printer and let it complete its power-up 
cycle.
b.
When the POST cycle is complete, press 
SETUP/EXIT
 to 
enter the Setup Mode.
c.
Scroll through the parameters by pressing 
PLUS (
+) until 
you reach LIST NETWORK.
d.
Press 
SELECT
.
e.
Press 
PLUS (
+) to print a network configuration label 
f.
Press 
SETUP/EXIT
 twice to exit the Setup Mode.
g.
Continue to 
G-Series, ZP Series, 
and LP/TLP 2824 Plus
a.
Turn on (I)
 
the printer and let it complete its power-up 
cycle.
b.
Press and hold 
FEED
 until you see one flash of the LED. 
c.
After the LED flashes, release the button. A network and 
d.
Continue to