Zebra Technologies P1043301-005 Manual De Usuario
79
Getting Started
Defaulting ALL Print Servers
11/21/13
P1043301-005
Defaulting the Print Servers on the ZD500R, ZT210, ZT220, ZT230,
ZT410, and ZT420 Printers
ZT410, and ZT420 Printers
1.
Turn off (O) the printer.
2.
Press and hold the
Pause
and
Cancel
keys and turn on (l) the printer.
3.
Hold the
Pause
and
Cancel
keys until the first status indicator light turns off.
4.
Which type of print server do you have?
.
Defaulting the Print Servers on the ZD500R, ZT230, ZT410, and
ZT420 Printers via the Control Panel
ZT420 Printers via the Control Panel
Refer to the User Guide for your printer for specific instructions on how to use the control
panel.
panel.
If you have a…
Then, you will see one of the following conditions…
Wired print server
a.
Steady green Network status indicator: A 100Base-T link was
found.
found.
b.
Steady yellow Network status indicator: A 10Base-T link was
found.
found.
c.
Steady red Network status indicator: No network link was
found.
found.
Wireless print
server
server
a.
Steady green Network status indicator: A wireless network
was found. Your print server has successfully associated with
and been authenticated by the wireless network.
was found. Your print server has successfully associated with
and been authenticated by the wireless network.
b.
Steady red Network status indicator: No network link was
found.
found.
Note • If you reset your wireless print server, the ESSID
setting will change to “125” and all encryption and
authentication settings will be disabled. The wireless print
server settings should be reconfigured to match your
wireless network settings.
setting will change to “125” and all encryption and
authentication settings will be disabled. The wireless print
server settings should be reconfigured to match your
wireless network settings.