Zebra Technologies P520 Manual De Usuario
OPERATION
2 • 3
Loading Lamination Patch
The P520 Printer requires approved patches (see Appendix C).
Clear patches, hologram patches or Overlay varnishes are specifically designed for
your P520 Printer. For optimum performance and printer life (Laminator), always use
approved patches.
Clear patches, hologram patches or Overlay varnishes are specifically designed for
your P520 Printer. For optimum performance and printer life (Laminator), always use
approved patches.
1 •
Remove patch from packaging.
2 •
With printer power ON and printer Ready status,
open cover.
3 •
Press down on the Laminator Unlock Lever to
open the laminator bracket. The laminator bracket
will pop open.
will pop open.
4 •
Load patch onto the supply spindle “1”
(under laminator bracket) and align the notch of the
empty core with the spindle screw ( with tape
attached) onto the take-up spindle “2” .
Make sure the patch comes off the top of the supply
spindle and feeds to the top of the take-up spindle.
empty core with the spindle screw ( with tape
attached) onto the take-up spindle “2” .
Make sure the patch comes off the top of the supply
spindle and feeds to the top of the take-up spindle.
5 •
Push down on the Laminator Lock Lever until an
audible “click” signals the locked-down position.
6 •
Close Cover
.Please note that the ribbon automatically
synchronises whenever the laminator head
lock down occurs.
synchronises whenever the laminator head
lock down occurs.
2
1