Zebra Technologies zebra zxp series 1 Manual De Usuario

Viewing Printer Information

P1060728-002

Zebra ZXP Series 1 Card Printer User’s Manual

13

Step 1. Turn printer power ON, wait until the LCD Display Panel shows READY, turn 

printer power OFF, and then wait a minimum of 20 seconds.

Step 2. While holding down the Control Button, turn printer power ON. The LCD Display 

Panel will glow blue.

Step 3. Keep pressing the Control Button, and observe the LCD Display Panel show 

Initializing and CHECKING RIBBON.

Step 4. When the PRINTER INFO message appears in the display panel, momentarily release 

and press the Control Button to display the first parameter: Model Name.

Step 5. Continue to tap the Control Button to advance through the parameters and cycle back 

to the beginning:

a.

Model Name (including the printer configuration)

b. Serial Number
c.

Firmware Version

d. Head Resistance
e.

X & Y Offset (front)

f.

X & Y Offset (back)

g. EC Offset (front and back)
h. Ribbon Type
i.

Smart Offset

j.

IP Address (note this address for Ethernet installation; see 

)

k. Mask
l.

Gateway

m. DHCP (enabled or disabled)

Step 6. A long press of the Control Button (about 1 second) will escape the sequence. Idle 

time of 15 seconds will also escape the sequence.

LCD Display 
Panel

Control 
Button