Zebra Technologies zebra zxp series 1 Manual De Usuario
74
Zebra ZXP Series 1 Card Printer User’s Manual
P1060728-002
6: Troubleshooting
Troubleshooting Procedures
Troubleshooting Procedures
LCD Panel Warnings and Error Messages
The following tables show causes and solutions to symptoms related to improper operation.
Check the table when experiencing any loss of operation or print quality.
Check the table when experiencing any loss of operation or print quality.
Note: If the problem persists, contact Technical Support; see
.
PANEL WARNINGS (printer will still operate)
Problem / Symptom
Description or Cause
Possible Solution
Note
CHECKING RIBBON
Printer is determining type of ribbon
installed.
installed.
No action required -- status message
only.
only.
CLEAN PRINTER
Printer cleaning required.
Refer to
CLOSE LID
The lid is open.
Make sure that the lid is completely
and securely closed.
and securely closed.
ENCODING ERROR
May be incorrect card type.
Check that you are using the correct
magnetic card type (for low or high
coercivity encoding).
magnetic card type (for low or high
coercivity encoding).
INVALID MAGNETIC DATA
The magnetic data may be invalid.
Check data format.