Zebra Technologies 3ULQWHUV Manual De Usuario

Front Panel Controls

Zebra XiIIIPlus Users Guide

59

The LCD display is shown in the order it appears when using NEXT/SAVE to move 
through the front panel menu. PREVIOUS may be used to move backward in the 
menu. 

 

35,17(5

5($'<

'$5.1(66

Adjusting Print Darkness: 
‡Press the right black oval to increase darkness. 
‡Press the left black oval to decrease darkness.
Default: +4

Range:  0 to +30.0

Darkness settings depend on a variety of factors, 
including ribbon type, labels, and the condition of 
the printhead. You may adjust the darkness for 
consistent high-quality printing.

If printing is too light, or if there are voids in printed 
areas, you should increase the darkness. If printing is 
too dark, or if there is spreading or bleeding of 
printed areas, you should decrease the darkness.

The FEED Self Test described in the 

 can also be used to determine the best 

darkness setting. Since the darkness setting takes 
effect immediately, you can see the results on labels 
that are currently printing.

Set the darkness to the lowest setting that 

provides good print quality. Darkness set too high 
may cause ink smearing or burn through the ribbon.

Darkness settings also may be changed by the driver 
or software settings.