Zebra Technologies 105SL Manual De Usuario

Unpack and Inspect the Printer

11342L Rev. 8 6/4/2004

105SL User Guide

9

• Check all exterior surfaces.
• Raise the media door, and inspect the media compartment.
• Save the carton and all packing material in case the printer needs to be shipped. Contact 

your authorized Zebra reseller for instructions.

• Depending on how your printer was ordered, a power cord may or may not be included. If 

one is not included, or if the one included is not suitable for your requirements, see 

If you discover shipping damage:

• Immediately notify the shipping company and file a damage report.

• Keep the carton and all packing material for inspection.
• Notify your local Zebra reseller.

If you are not placing the printer into operation immediately, repackage it using the original 
packing materials. The printer may be stored under the following conditions:

• Temperature: –40°F to 140°F (–40°C to 60°C)
• Relative humidity: 5% to 85%, non-condensing

Electric Shock Caution • For personnel and equipment safety, always use an approved 
three-conductor power cord specific to the region or country intended for installation. This 
cord must use an IEC 320 female connector and the appropriate region-specific, three-
conductor grounded plug configuration.

Zebra Technologies Corporation is not responsible for any damage incurred 

during the shipment of the equipment and will not repair this damage under warranty