Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Zebra Technologies
  4. 79695L-002
  5. Manual De Usuario

Zebra Technologies 79695L-002 Manual De Usuario

Descargar
Página de 156
Troubleshooting
Calibration Problems
122
79695L-002 Rev. A
Z Series
®
/RZ™ Series User Guide
6/6/08
Calibration Problems
 identifies problems with calibration, the possible causes, and the recommended 
solutions.
Table 18 • Calibration Problems
Problem
Possible Cause
Recommended Solution
Loss of printing 
registration on labels. 
Excessive vertical 
drift in top-of-form 
registration.
The platen roller is dirty.
Clean the platen roller according to the 
instructions in 
Media guides are positioned 
improperly.
Ensure that the media guides are properly 
positioned.
The media type is set 
incorrectly.
Set the printer for the correct media type 
(gap/notch, continuous, or mark). See 
The media is loaded incorrectly.
Load media correctly. See 
.
Auto Calibrate failed.
Media or ribbon is loaded 
incorrectly. 
Ensure that media and ribbon are loaded 
correctly. 
The sensors could not detect the 
media or ribbon. 
Manually calibrate the printer. See 
.
The sensors are dirty or 
positioned improperly. The 
sensors are dirty, or media is 
positioned improperly for the 
sensors to detect.
Ensure that the sensors are clean and that media 
is positioned properly.
The media type is set 
incorrectly.
Set the printer for the correct media type 
(gap/notch, continuous, or mark). See