Avery 9493 Manual De Usuario

I B M A I X C o n f i g u r a t i o n

To configure a print server on IBM AIX 4.x, use the SMIT program as follows:
1.  Enter SMIT and select Devices.
2.  Select Printer/plotter.
3.  Select Manage remote printer subsystem.
4.  Select Client services.
5.  Select Remote printer queues.
6.  Select Add a remote queue.  Enter the following remote queue settings:

Name of queue to add (user selectable) Activate the queue (Yes).

♦
♦

Destination host (print server’s IP address; or if you have configured the /etc/hosts file,
use the name of the print server that you specified in that file).
Name of queue on remote printer BINARY_P1 for binary files or TEXT_P1 for text files).
Name of device to add (user selectable; for example lp0).

7. You should now be able to print using the normal lp -d command.
Note: The configuration for earlier versions of AIX is slightly different.

The print server can also be configured as a JetDirect card using AIX. To do this, refer
to your AIX documentation.

C o n f i g u r a t i o n o n O t h e r S y s t e m s

The print server can be used with any computer system that supports the LPR/LPD protocol or
HP JetDirect (port 9100 is the default; however, it can be reconfigured). Refer to the system’s
documentation to configure LPR/LPD or JetDirect print queues.

3-4 System Administrator’s Guide