OKI 10ex Manual De Usuario

1.

Pull out the rear exit extender until it locks and lift out
the support bar.  Pull down the manual feed tray and adjust
the paper guides.

2.

Insert the envelope, flap down and to the left, until the
printer grips it.

3.

Set envelope size and landscape orientation in your
software, then issue the print command.

• Always use rear output.

• No windows or metal clasps.

• Media no heavier than 28 lbs.

• Smooth even surface.

• No self-sealing flaps.

• Seams down the sides, not across the middle.

• Squared-off flaps that do not cover the print area.

Select and print transparencies using the 

option under 

 in 

. Select 

 to

ensure the correct fusing temperature is set. Damage may
occur to your transparencies if an incorrect setting is used.

The normal paper path from a main paper tray to the top
output stack involves two complete U-turns. This may
sometimes cause very heavyweight paper or cardstock to jam
or misfeed.

Use the front tray to feed this type of paper and the rear paper
exit to collect your printed output. This gives a nearly straight
paper path through the machine, and may prove more reliable
in this type of application.

The process used to fuse (fix) the printed image to the paper
involves a mixture of pressure and heat. Too much heat will
cause lightweight paper to crease or curl, while too little heat
will cause the image not to fuse fully into heavyweight paper.

Use the 

 setting in 

 to adjust for different

thicknesses of paper.

10exuGB.p65

28/09/98, 11:49

16