Packard Bell M5801 Manual De Usuario

uAHCI Port1 /Port2 /Port3 /Port4 /Port5 /Port6

Your computer has one IDE channel which can be installed with one or two devices

(Master and Slave). In addition, this motherboard supports two SATA channels and

each channel allows one SATA device to be installed. Use these items to configure

each device on the IDE channel.

Press <Enter> to display the IDE submenu:

CMOS Setup Utility-Copyright( C ) 1985-2010, American Megatrends, Inc.

AHCI Port 1

Item Help

----------------------------------------- ------------------------

S.M.A.R.T stands for

Device :

Hard Disk

Self-monitoring,

Vendor:

ST3320418AS

Analysis and Reporting

Size:

320.0GB

Technology.

----------------------------------------- ------------------------

S.M.A.R.T

Enabled

↑↓→←：

Move Enter：Select +/-/：Value F10：Save & Exit Setup

F1：General Help F9：Load Default Settings Esc： Exit Without Saving

S.M.A.R.T. (Auto)

The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) system is a diagnostics technology that

monitors and predicts device performance. S.M.A.R.T. software resides on both the disk drive and the host

computer.

32Bit Data Transfer (Enabled)

Use this item to enable or disable 32Bit Data Transfer.

Press <Esc> to return to the Standard CMOS Setup page.

Halt On (All, But Keyboard)

This item defines the operation of the system POST (Power On Self Test) routine. You can use this item to

select which types of errors in the POST are sufficient to halt the system.

Press <Esc> to return to the main menu setting page.