Samsung DP515A2GK01US Manual De Usuario

  Enter a password, press <Enter>, re-enter the password for 

confirmation, and press <Enter> again.
The password can be up to 8 alphanumeric characters. 

Special characters are not allowed.

  The supervisor password has been set. 

The supervisor password is required to turn the computer on 

or to enter the BIOS Setup.

For some models, if the password entered message appears 

in the Setup Notice window, the settings are not complete 

until the <Enter> key is pressed.

Using the User Password, you can turn the computer on but you 

cannot change the major settings of the BIOS Setup because you 

cannot enter the BIOS Setup. 
This helps prevent unauthorized access to the major settings in 

the BIOS Setup menu.
Before configuring a user password, a supervisor password must 

have been configured. Deactivating the supervisor password also 

deactivates the user password.
In the Set User Password item, press <Enter> and complete the 

procedures from Step 3 of Setting a Supervisor Password.

To setup a boot password, the administrator password (Set 

Supervisor Password) should be set in advance.
Set the Password on boot item to Enabled. 
Once a boot password is set, you have to enter a password to boot 

up the computer.
Be sure to remember the password for later use.