Siemens 620 Manual De Usuario
Configuring the SIMATIC Box PC 620
5-29
SIMATIC Box PC 620 Manual
A5E00131465-01
5.1.8
Default Setup Settings
Documenting Your Device Configuration
If you have made any modifications to the default Setup settings, you can enter
them in the following table. You can then refer to these entries if you need to make
any hardware modifications later.
them in the following table. You can then refer to these entries if you need to make
any hardware modifications later.
Note
Print the following table out and keep the pages in a safe place once you have
Print the following table out and keep the pages in a safe place once you have
filled in your entries.
Systemparameter
Default Settings
YourEntries
Main
System Time
System Time
hh:mm:ss
System Date
MM/TT/JJJJ
Diskette A
1,44 MB, 3 1/2”
bei LS 240: Disabled
Primary Master
C: 20496 MB
Primary Slave
None
Secondary Master
CD–ROM
Secondary Slave
None
Memory Cache
Write back
Boot Options
Quick Boot Mode
Quick Boot Mode
Enabled
SETUP prompt
Enabled
POST Errors
Enabled
Floppy check
Disabled
Summary screen
Enabled
Keyboard Features
Num Lock
Num Lock
On
Key Click
Disabled
Keyboard auto-repeat rate:
30/s
Keyboard auto-repeat delay
1/2s
Hardware Options
PCI-MPI/DP:
PCI-MPI/DP:
Enabled
On Board Ethernet
Enabled
Ethernet Adress
08000624xxxx
LAN remote boot
Disabled
Cardbus/PCMCIA Slot
Enabled
SafeCard Functions
Enabled
Legacy USB Support
Disabled