Siemens 620 Manual De Usuario

8-7

SIMATIC Box PC 620  Manual

A5E00131465-01

8. After data transfer and end message acknowledgement Windows 98 setup can

be started directly using the 

LW:\WIN98\SETUP.EXE program. (LW: Drive to which the WIN98 folder has

been transferred).

9. After having started setup.exe please follow the screen instructions.

This CD contains encoded data which can only be transferred to a SIEMENS

SIMATIC PC.
Data transfer is carried out with the OEMSETUP.EXE program on the CD ROM or,

after booting, from the CD-ROM with the recovery function.
After transferring the required data to the hard disk, the operating system can be

installed using the Windows NT setup program.

If a Windows operating system is already installed or if the PC has been started

with a user created bootdisk, data transfer takes place using the OEMSETUP.EXE

program. To do this, start the OEMSETUP.EXE program in the root directory of the

Recovery CD and continue the sequence as of point 5.
If there is no operating system installed, proceed as follows:
1. Insert the Recovery CD in the CD ROM drive and reboot the system.
2. To boot from the CD proceed as follows: When the message

Press <F2> to enter Setup

appears on the screen press the ESC key. After intialization a boot menu to

select the boot options is displayed.

3. Select ”ATAPI CD ROM Drive”.
4. When “Microsoft Windows 98-Startup Menu” is displayed, select

“1. Boot for CD-Recovery”.

If the hard disk has not been installed, first select “2. Boot for FDISK, FORMAT

or Windows Setup” (Section 8.1).

5. You have to acknowledge the “SIEMENS End User License Agreement” with

the F8 function key. Pressing ESC allows you to decline the agreement and

cancels the installation.

6. In the next screen you can select the components which are to be copied from

the CD to the hard disk. Transfer of at least the folder “I386” is necessary for

the Windows NT installation or setup.

7. Select the drive for data transfer. The selected drive is not the installation drive

for Windows. For the Windows setup, you need an available disk space of

approximately 300 MB on the installation drive for Windows.