Siemens 620 Manual De Usuario

2-11

SIMATIC Box PC 620  Manual

A5E00131465-01

The hard disk drive is used for the storage of large quantities of data. it is fitted in a
mounting which is easily exchangeable and damped against vibration.

Caution
Risk of loss of data and damage to the drive!
Drives are sensitive to vibrations and shock. Any vibrations occurring during

operation can lead to the loss of data or damage to the drive.
If you intend transporting the unit, switch it off, and wait until the drive has come to

rest (about 20 seconds) before you move it.

Depending on the device equipment, a CD-ROM or a CD-RW/DVD drive is fitted in
the SIMATIC Box PC 620. The fitting depth of the PC is increased by 20mm as a
result. 

When the open/close button is pressed, the CD/DVD tray is travelled out with a

slight delay. Insert the CD/DVD with the labelling facing forwards into the tray. The

CD/DVD tray is retracted automatically, when the tray is pressed briefly or the the

Open/Close button is pressed.
By briefly pressing the eject button, the drawer springs out slightly. You can

remove the CD/DVD.

When the device ist switched off, the disk can be forced out by using a pin (for
example, a opened up paper clip).

Notice
After the drawer has been closed, the CD/DVD is tested and the access display

light on the drive starts to flash:

– If the access LED flashes continually, the CD/DVD is faulty but can still be

read,

– If the access LED flashes several times and then remains lit, the CD/DVD

you have inserted is defective and cannot be read.

– normally the access LED is lit when reading the CD/DVD.

Caution
CD-ROM or CD-RW/DVD drives are sensitive to vibrations and shock. Any vibra-

tions occuring during operation can lead to damage to the drive or CD/DVD.