Siemens 620 Manual De Usuario

3-23

SIMATIC Box PC 620  Manual

A5E00131465-01

You can connect the SIMATIC Box PC 620 to a SIMATIC S7 automation system
or to a PROFIBUS network via the potentially isolated*) PROFIBUS/MPI port**).
The MPI cable (5m) for connection to SIMATIC S7 CPUs (order no.: 
6ES7901-0BF00-0AA0) is supplied with the SIMATIC Box PC 620. Only
transfer rates of up to 187.5 kBit/s are possible with this cable connection. The
12 Mbit/s PROFIBUS connecting cable is required for baud rates from
1.5 Mbit/s ( order no. 6ES7901-4BD00-0XA0).

MPI/DP port

6ES7901-0BF00-0AA0

In disturbed surroundings:

bus connector

6ES7972-0BB10-0XA0 

or 

6ES7972-0BB20-0XA0

(5 m length

Figure 3-14 Connection Using the PROFIBUS/MPI Interface

Proceed as follows when connecting to a SIMATIC S7 programmable logic control-
ler:

1. Disconnect the PC from the power supply.
2. Connect the cable to the PROFIBUS/MPI interface.

Caution
Risk of damage to the SIMATIC Box PC 620!
Before plugging in the cables, the static charge on your body, the unit, and the

cables must be equalized. You can do this by briefly touching the metal mounting

plate for the interfaces on the left-hand side panel.

* Electrical isolation in the saftey extra-low voltage circuit (SELV circuit).

** Optional product feature