Siemens 620 Manual De Usuario

4-15

SIMATIC Box PC 620  Manual

A5E00131465-01

Proceed as follows to install the holding-down device.

1. Insert the slide element through the guide slit until it is resting firmly on the 

module. The module must now be introduced into the notch.

Caution
No pressure may be exerted on the module! Therefore, do not use force to press

the slide element onto the module.

2. Cut off the projecting part of the slide element:

– Score the slide element at the top edge of the holding-down device with a

knife and break it off.

– Nip off the surplus with a sharp side cutter.