Brother 2270DW Manual De Usuario

Troubleshooting 

The machine prints 
unexpectedly or it prints 
garbage data.



Make sure that the printer cable is not too long. We recommend that you use a 
USB cable that is no longer than 2 meters (6.5 feet).



Make sure that the printer cable is not damaged or broken.



If you are using an interface-switching device, remove it. Connect your computer 
directly to your machine, and then try again.



Make sure that you have chosen the correct printer driver with ‘Set as Default 
Printer’.



Make sure that the machine is not connected to the same port that is also 
connected to a storage device or scanner. Remove all other devices and connect 
the machine to the port only.

The machine cannot print full 
pages of a document. An error 
message MEMORY FULL 
appears.



Press Go to print the remaining data in the machine's memory. Cancel the print 
job if you want to delete the remaining data in the machine memory. (See Go 
button on page 60.)



Reduce the complexity of your document or reduce the print resolution.

The machine cannot print full 
pages of a document. An error 
message PRINT OVERRUN 
appears.



Press Go to print the remaining data in the machine memory. Cancel the print job 
if you want to delete the remaining data in the machine memory. See Go button 
on page 60.



Reduce the complexity of your document or select a lower print resolution.



(HL-2250DN / HL-2270DW only)
Change the following settings in the supplied Windows

®

 driver and try again. The 

best combination of these settings will vary depending on your document:

• Graphics

• TrueType mode

• Use Printer TrueType

®

 Fonts

1

Choose the Basic tab, choose Manual in Print Settings, and then click Manual Settings....

The headers or footers appear 
when the document displays on 
the screen but they do not show 
up when it is printed.



Adjust the top and bottom margins of your document.