Fujitsu 2000 Manual De Usuario

8

This section explains how to switch on the power to your PC.

●

Once you have switched on the power, do not move any equipment from one
place to another or subject it to shock and/or vibration.

Failure to heed this precaution may result in malfunction of the device.

Press the power switch of the CRT display.
At this point, nothing is displayed.

Press the power switch of the PC main unit.
The power LEDs of the PC main unit and CRT display
unit activates.
When the power is switched on, the logo "Fujitsu" appears
on the CRT screen, and the system is activated after a
while. (Power On Self Test (POST) is carried out while
the logo is on the screen.)

- If nothing appears on the CRT screen, check that the CRT display unit cable has been connected

securely.
If the display area is not at the center of the screen, make adjustments on the CRT display unit
side.

- If POST detects any abnormal condition, it displays an error message.
- If the CRT display unit power cord is connected to the service outlet of the PC main unit, the

CRT display unit is switched on simultaneously with the main unit.  In this case, the power switch
of the CRT display unit can be left in the on position; there is no need to set it to on or off each
time you start or finish using the PC.
Press only the power switch of the PC main the unit next time you use the PC, as described in
step 2, and the CRT display unit will also be switched on.

- When you want to switch on the power immediately after you switched off, or vice versa, just

wait for about 10 seconds.

04Carrol(7-18)

17/06/2000, 13:49

8