Fujitsu 2000 Manual De Usuario
22
2 DRAM Installation
The mainboard can be installed with 64 / 128 / 256 MB 168 pins DIMM module DRAM, and the
DRAM speed must be 100 MHz for SDRAM. The DRAM memory system on mainboard consists of
bank 0 & bank 1. Since 168 pins DIMM module is 64 bits width, using 1 PCS which can match a 64
bits system. The total memory size is 512MB SDRAM. Insert the DRAM DIMM module into the
DIMM socket at Vertical angle. If there is a wrong direction of Pin 1, the DRAM DIMM module couldn’t
be inserted into socket completely.
DRAM speed must be 100 MHz for SDRAM. The DRAM memory system on mainboard consists of
bank 0 & bank 1. Since 168 pins DIMM module is 64 bits width, using 1 PCS which can match a 64
bits system. The total memory size is 512MB SDRAM. Insert the DRAM DIMM module into the
DIMM socket at Vertical angle. If there is a wrong direction of Pin 1, the DRAM DIMM module couldn’t
be inserted into socket completely.
DIMM1
DIMM2
Capacity
DIMM 1
DIMM2
64MB
Empty
64MB
96MB
32MB
64MB
128MB
64MB
64MB
192MB
128MB
64MB
256MB
128MB
128MB
512MB (Maximum)
256MB
256MB
CAUTION
●
When removing the memory, open the hook on both side of the memory
slot outside at the same time when you detach the memory.
05Carrol(19-24)
17/06/2000, 13:49
22