Gateway E1400 Manual De Usuario
38
Replacing and Adding Drives
Replacing the hard drive
The 3.5-inch hard drive is located in a metal tray that slides in and out of
the hard drive cage. The tray has a spring so you can expand the tray to insert
a drive. When you release the sides of the tray it will contract back together
and secure the drive.
the hard drive cage. The tray has a spring so you can expand the tray to insert
a drive. When you release the sides of the tray it will contract back together
and secure the drive.
To replace the 3.5-inch hard drive:
1
Turn off the computer, disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
installed), and all external peripheral devices.
2
Remove the right panel. (See “Removing the side panels” on page 19 and
observe the “Static electricity precautions” on page 17.)
observe the “Static electricity precautions” on page 17.)
3
Disconnect the power and data cables from the hard drive.
4
The metal tray that holds the hard drive is secured by a set of hard drive
tray release tabs. Remove the tray by squeezing both release tabs inward,
then slide the hard drive tray out of the drive cage.
tray release tabs. Remove the tray by squeezing both release tabs inward,
then slide the hard drive tray out of the drive cage.
Hard drive tray
release tabs
Hard drive
05960.book Page 38 Monday, February 21, 2000 2:47 PM