Gateway E1400 Manual De Usuario
54
System Components
Replacing the power supply
Observe the following instructions for removing the power supply and
installing a new one. Your power supply can be removed without
disconnecting power supply cables or removing screws.
installing a new one. Your power supply can be removed without
disconnecting power supply cables or removing screws.
To replace the power supply:
1
Turn off the computer, disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
installed), and all external peripheral devices.
2
Remove the right panel. (See “Removing the side panels” on page 19 and
observe the “Static electricity precautions” on page 17.)
observe the “Static electricity precautions” on page 17.)
3
Pull the power supply release lever away from the chassis. This releases
the power supply from its connector and moves it out from the back of
the chassis.
the power supply from its connector and moves it out from the back of
the chassis.
4
From the rear side of the chassis, pull the power supply out and away
from the chassis.
from the chassis.
Power supply
release lever
Power
supply
supply
05960.book Page 54 Monday, February 21, 2000 2:47 PM