Gateway 9210 Manual De Usuario
61
www.gateway.com
8
Follow the instructions in
9
Turn on your server. Your server completes the action specified by the jumper setting
you made.
you made.
10
Turn off the server, then disconnect the power cord.
11
12
Return the jumper in its initial setting on J1D1
to change the setting you made in
back to the normal setting.
13
Follow the instructions in
Item
Function/Mode
Jumper Setting
Configuration
A
Normal boot
Recovery boot
Pins 1 and 2
Pins 2 and 3
The BIOS uses current configuration information
and passwords for booting.
and passwords for booting.
The BIOS attempts to recover the BIOS
configuration. A formatted BIOS recovery diskette
is required.
configuration. A formatted BIOS recovery diskette
is required.
B
BIOS bootblock
protect
protect
BIOS bootblock
unprotect
unprotect
Pins 4 and 5
Pins 5 and 6
The BIOS bootblock is in protected mode.
The BIOS bootblock is in unprotected mode and
can be updated (flashed) with a current BIOS. For
more information, see
can be updated (flashed) with a current BIOS. For
more information, see
C
Password protect
Password clear
Pins 7 and 8
Pins 8 and 9
The system password setting is in protected
mode.
mode.
The system password setting is in unprotected
mode.
mode.
D
CMOS normal
CMOS clear
Pins 10 and 11
Pins 11 and 12
The CMOS is in normal operation.
The CMOS content is cleared.