Bixolon SRP-270 Manual De Usuario

 

 
1. Before you disassembly the Printer Assy, you 

should remove : 
- Plate Bottom (see Chapter 4-2) 
- Cover Assy (see Chapter 4-3 & 4-4) 
- Case Upper Assy (see Chapter 4-6) 

 
2. Remove the Spool Gear and Belt, as shown 

below.(SRP-270D Type) 

 

3. Remove two screws securing the Printer Assy. 

Separate the Printer Assy from the Case Lower.

 

 
 
 

 
1. Before you disassembly the Auto Cutter Assy, you 

should remove : 
- Plate Bottom (see Chapter 4-2) 
- Cover Assy (see Chapter 4-3 & 4-4) 
- Case Upper Assy (see Chapter 4-6) 
- Printer Assy (see Chapter 4-7 & 4-8)   

2. Remove two screws securing the Auto Cutter 

Assy. Separate the Auto Cutter Assy from the 
Printer Assy, as shown below. 

 

 

3. Before you reassembly the Auto Cutter Assy, 

you should set up the Belt and Hinge.