Gateway MAN FX510 Manual De Usuario

CHAPTER 6: Troubleshooting

110

•

To recover software and device drivers that were 
pre-installed at the factory, see 

•

To return your system to a previous condition when it 
was working correctly, see 

.

•

To completely recover your system to its factory 
condition, see 

If you upgrade or exchange your hard drive, or if your hard 
drive is completely erased or corrupted, your only option for 
system recovery may be to reinstall Windows from the 
Windows DVD, then recover your pre-installed software and 
device drivers using recovery discs that you created. (Your 
computer must have a recordable disc drive to use these 
options.)

•

To re-install Windows using the Windows DVD, see 

.

•

To re-install your pre-installed software and device 
drivers using recovery discs, see 

Recovering pre-installed software and drivers

You can perform a partial recovery by recovering the software 
and device drivers that were pre-installed at the factory. If you 
need to recover software that did not come pre-installed on 
your system, you need to follow that software’s installation 
instructions.
You can recover pre-installed software and drivers from a set 
of recovery discs (you must create the discs) or by using 
Gateway Recovery Center.

To prepare your computer for additional system recovery options, you 

should create a set of software and driver recovery discs as soon as possible. 
For instructions, see 

8512066.book  Page 110  Tuesday, January 16, 2007  11:02 AM