Gateway MAN FX510 Manual De Usuario
CHAPTER 4: Upgrading Your Computer
68
10
Replace the side panel by following the instructions in
.
Replacing the system board
To replace the system board:
1
Remove the side panel by following the instructions in
.
2
For more stability, place your computer on its side. To
avoid scratching the case, place it on a towel or other
non-abrasive surface.
avoid scratching the case, place it on a towel or other
non-abrasive surface.
3
Disconnect any cables that are attached to any
expansion cards, noting their locations and orientation.
(You will reconnect the cables after you install the cards
on the new board.)
expansion cards, noting their locations and orientation.
(You will reconnect the cables after you install the cards
on the new board.)
4
Remove the expansion cards by following the
instructions in
instructions in
. You can slightly seesaw a card end-to-end
to loosen it, but do not bend a card sideways.
Tools
You need a Phillips screwdriver to replace the system board.
8512066.book Page 68 Tuesday, January 16, 2007 11:02 AM