Intel 820E Manual De Usuario

178  

Design 

Guide 

To meet the tight tolerances required, a good design process is as follows: 

• 

Specify the material to be used. 

• 

Calculate the board geometries for the desired impedance or use the example stack-up provided. 

• 

Build test boards and coupons. 

• 

Measure the board impedance using a TDR and follow Intel’s Impedance Test Methodology 
Document (located on the 

 web site). 

• 

Measure geometries with cross section. 

• 

Adjust design parameters and/or material, as required. 

• 

Build a new board and remeasure the key parameters. Be prepared to generate one or two board 
iterations. 

This process will require iteration, as follows: design, build, test, modify, build, test…. 

  

To deliver reliable systems at increased bus frequencies, it is critical to characterize and understand the 
trace impedance. Incorporating a test coupon design into the motherboard makes testing simpler and 
more accurate. The test coupon pattern must match the probe type being used. 

The test coupon location is listed in order of preference, as follows: 

• 

1st choice (ideal location) 

= 

Memory section of the motherboard 

• 

2nd choice 

 

 

= 

Any section of the motherboard 

• 

3rd choice 

 

 

= 

Separate location in the panel 

The Intel Printed Circuit Board (PCB) Test Methodology Document (order 298179) should be used to 
ensure boards are within the 28 

Ω

 ± 10% requirement.  The Intel Controlled Impedance Design and Test 

Document should be used for the test coupon design and implementation.  These documents can be found 
at: 

 (Select “Application Notes”.)