Apple WS 8150 Manual De Usuario
Take Apart
Tape Drive - 11
1 Disconnect the SCSI data
cable and power cable
from the back of the tape
drive.
Note
: There are two internal
SCSI connectors on the logic
board (see “Logic Board
Connectors” in Basics for an
illustration). In the
standard configuration, the
SCSI connector at the top of
the logic board is used for
the CD-ROM/Tape drives,
and the SCSI connector near
the bottom of the logic board
(directly beneath the DRAM
and above the reset/
SCSI Data Cable
Tape Drive Power Cable