Acer R700 Manual De Usuario

25

Set a time out period so 
that keyboard and 
mouse input are not 
accepted

Also, screen can be 
blanked, and writes to 
diskette can be 
inhibited

Specify and enable an inactivity time out period 
of from 1 to 120 minutes.

If no keyboard or mouse action occurs for the 
specified period, attempted keyboard and mouse 
input will not be accepted.

The monitor display will go blank, and the 
diskette drive will be write protected (if these 
security features are enabled through Setup).

To resume activity: Enter the correct password(s).

Control access to using 
the SSU: set supervisor 
password

To control access to setting or changing the 
system configuration, set a supervisor password 
and enable it through Setup.

If both the supervisor and user passwords are 
enabled, either can be used to boot the server or 
enable the keyboard and/or mouse, but only the 
supervisor password will allow Setup to be 
changed.

To disable a password, change it to a blank entry 
or press CTRL-D in the Change Password menu of 
the Supervisor Password Option menu found in 
the Security Subsystem Group.

To clear the password if you cannot access Setup, 
change the Clear Password jumper (see “6 
Technical Reference” on page 95).

Control access to the 
system other than SSU: 
set user password

To control access to using the system, set a user 
password and enable it through Setup.

To disable a password, change it to a blank entry 
or press CTRL-D in the Change Password menu of 
the User Password Option menu found in the 
Security Subsystem Group.

To clear the password if you cannot access Setup, 
change the Clear Password jumper (see “6 
Technical Reference” on page 95).

Boot without keyboard

The system can boot with or without a keyboard. 
During POST, before the system completes the 
boot sequence, the BIOS automatically detects 
and tests the keyboard if it is present and displays 
a message.

BS811.f/cppl!!Qbhf!36!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN