GE 1000-1500-2000-3000 VA Manual De Usuario

 

 

 

 

g

 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
Though the batteries (the internal energy reserve) were fully charged when the UPS left 
the factory, they might have lost some energy during transport and/or storage. It is 
recommended to allow the UPS to recharge the batteries for at least 6 hours. This way 
you ensure that the UPS can provide sufficient runtime in case of a utility power failure. 

 
 

 

When the UPS is still in ‘STAND-BY’ mode, check the site-wiring fault LED. If the UPS 
is plugged into an improperly wired AC utility power outlet, this LED flashes as shown in 
Fig 2.6. 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

The detection of site wiring faults includes a missing ground, phase-neutral polarity 
reversal and an overloaded neutral circuit. If the LED flashes, unplug the UPS and have 
the site wiring checked by a qualified electrician. 
 
 
This step completes the installation procedure.