Fujitsu FLASH-CAN-100 Manual De Usuario
Change even page title here
Chapter 7 Connectors
UG-900001-32
- 16 -
© Fujitsu Microelectronics Europe GmbH
7.4 UART
(X4)
One 9-pin D-Sub female connectors are used
for the serial interface (UART).
for the serial interface (UART).
TXD is the transmit output, RXD is the receive input.
The DTR signal can be used to generate a reset.
Please use 1:1 cable for PC-connection.
Connector X4:
7.5 CAN
Interface
(X2, X3)
Two 9-pin D-Sub male connector
are used for the CAN interface.
are used for the CAN interface.
Adjust both potentiometers (P1, P2) clockwise
to their end position.
(Check that Pin 8 of U4 and Pin 8 of U5 are grounded.)
to their end position.
(Check that Pin 8 of U4 and Pin 8 of U5 are grounded.)
Connector X2, X3:
GND CANL
CANH
1
6
5
9
GND DTR RxD TxD
CTS RTS DSR
1
6
5
9