Cisco Systems 124792 Manual De Usuario
3-4
Cisco AC/DC Power System User Guide, R1.0
May 2006
Chapter 3 Component Replacement
3.2.2 Replace the Controller Tray
Figure 3-3
Removing the Controller Faceplate
Step 3
Slide the controller tray out and away from the system shelf to access the Alarm Interface Board
(
(
#2).
Step 4
Remove the Alarm Interface Board DC terminal block (
#1, depending on your
controller hardware).
Step 5
Remove the alarm cable connections (
or
#2). If alarm cables are not labeled with
the jumper number, label the cables with the appropriate jumper number: J16, J15, J14 (1,2,3), and J14
(4,5,6)/J13 (for the system without an LCD).
(4,5,6)/J13 (for the system without an LCD).
•
–J16 terminal block
124765