Thermaltake 350W Manual De Usuario

Purepower

Series

Purepower

Series

Power Connector Introduction

Connector Type

Connectors & Cable length

20+4pin

ATX 12V 4pin

SATA

4. Installation Steps

Cable

P/N Model

W0330 550W

W0329 450W

1. Open your computer case; please refer to the direction in your

case manual.

2. Install the PSU into the case with the four screws provided.

3. Connect the 24 pin Main Power Connector to your

motherboard and peripheral. If your motherboard uses a 20-pin

connector, detach the 4-pin attachment on the 24-pin connector.

4. Connect the 8-pin or 4-pin connector for the CPUs.

5. Connect other peripheral power connectors to devices such as

hard drives, optical drives, etc.

6. Close your computer case and connect the AC power cord to

the power supply AC inlet.

Note: The detachable 4-pin section cannot be used in place of a 4-pin +12V

connector.

Note: Make sure that your system is turned off and unplugged.
Disconnect the AC power cord from your old power supply.

20+4pin Main

Connector

4pin +12V CPU

Connector

SATA

Connector

Peripheral

Connector

Floppy

Connector

6pin PCI-E

Connector

W0328 350W

MODELS

W0330
W0329
W0328

Molex & FDD

W0330

W0329

W0328

W0330

W0329
W0328

W0330
W0329

SATA

PCI-E 6pin

1 x 24pin Main connector
(400mm)

1 x ATX 12V 4pin connector
(400mm)

3  x  Peripheral,  1  x  FDD  connectors
(400mm  +  150mm  +  150mm  +  150mm)
3  x  Peripheral,  1  x  FDD  connectors
(400mm  +  150mm  +  150mm  +  150mm)

3  x  Peripheral,  1  x  FDD  connectors
(400mm  +  150mm  +  150mm  +  150mm)
2  x  Peripheral  connectors
(400mm  +  150mm)

3  x  Peripheral  connectors
(400mm  +  150mm  +  150mm)
2  x  Peripheral,  1  x  FDD  connectors
(400mm  +  150mm  +  150mm)

2  x  SATA  connectors
(400mm  +150mm)
2  x  SATA  connectors
(400mm  +150mm)

2 x SATA connectors
(400mm + 150mm)

1 x 6pin PCI-E connectors
(400mm)

250x176mm