Xantrex Technology XPH 35-4T Manual De Usuario

  

Installation 

This instrument has a universal input range and will operate from a nominal 115V or 230V mains 
supply without adjustment.  Check that the local supply meets the AC Input requirement given in 
the Specification. 

When a three core mains lead with bare ends is provided this should be connected as follows: 

BROWN   -  MAINS 

LIVE 

BLUE 

  - MAINS 

NEUTRAL 

  

 

GREEN/YELLOW 

- EARTH   Safety 

Earth 

Symbol 

When fitting a fused plug a 5 amp fuse should be fitted inside the plug.  As the colours of the 
wires in the mains lead of this apparatus may not correspond with the coloured markings 
identifying the terminals in your plug proceed as follows: 

The wire which is coloured green-and-yellow must be connected to the terminal in the plug which 
is marked by the letter E or by the safety earth symbol shown above or coloured green or green-
and-yellow. 

The wire which is coloured blue must be connected to the terminal which is marked with the letter 
N or coloured black. 

The wire which is coloured brown must be connected to the terminal which is marked with the 
letter L or coloured red. 

WARNING!  THIS INSTRUMENT MUST BE EARTHED. 

Any interruption of the mains earth conductor inside or outside the instrument will make the 
instrument dangerous. Intentional interruption is prohibited. 

 

Connections 

All connections are made from the front panel. 

The load should be connected to the positive (red) and negative (black) terminals marked 
OUTPUT. 

The terminal marked 

 is connected to the chassis and safety earth ground. 

  

 

7