Cannon 3035 Manual De Usuario

Setting Up a Computer for Printing/Sending a Fax

Usin

g a 

TCP/IP Netw

or

k

NOTE

 

•

The admintool utility is included with the operating system. For specific operating 
instructions, see the operating system manual.

•

You can specify one of the following print queues.

- LP

The machine prints according to its spool settings. Normally, <LP> is entered as a 
print queue.

- SPOOL

The machine prints only after spooling a print job on the hard disk, regardless of 
its spool settings.

- DIRECT

The machine prints without spooling a print job on the hard disk, regardless of its 
spool settings.

•

When the job log appears on the touch panel display of the machine, <unknown> 
may be displayed as the document name and user name of print data transmitted 
to the machine over a UNIX network.
(To display the job log, press [System Monitor] 

➞ [Print] ➞ [Log] on the touch panel 

display.)

 

If you are using Windows 98/Me, you can also set IPP by installing the IPP Client 
software for Windows 98/Me supplied by Microsoft.

In the following procedures, items displayed on the screens for Windows 98 are 
used; items might differ depending on your operating system.

Check the settings for <RX/Print Range> in [IP Address Range 
Settings] to see whether the IP address of the computer in 
which a driver is to be installed is permitted. For details, see 
step 12 in "TCP/IP Settings," on p. 3-3.

IMPORTANT

 

•

If the settings for <RX/Print Range> in [IP Address Range Settings] do not permit 
the IP address, you cannot install a driver. 

•

If the IP address of the computer is beyond the range of the permitted addresses 
set for <RX/Print Range> after installing a driver, you cannot print or send a fax 
from the computer.