Panasonic PT-D7500U Manual De Usuario

Adjusting the picture

PICTURE
PICTURE MODE

STANDARD

COLOR

TINT

COLOR TEMP.

STANDARD

GAMMA

STANDARD

CONTRAST

BRIGHT

SHARPNESS

NOISE REDUCTION

AI CONTROL

OFF

:MENU SELECT
:CHANGE

Press the “MENU” button.

The MAIN MENU screen will be displayed

Select “PICTURE” with the
buttons.

MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
RESISTERED SIGNAL LIST

Press the “ENTER” button.

The PICTURE screen will be displayed.

Select “COLOR TEMP.” with the
buttons.

Select the desired setting from below
with the

buttons.

“LOW”, “MIDDLE”, “HIGH”, “DYNAMIC” and
“USER”, “STANDARD”, “NATURAL”, “CINEMA”,
“GRAPHIC”

WHITE BALANCE
WHITE BALANCE HIGH
WHITE BALANCE LOW

:MENU SELECT
ENTER:SUB MENU

Select “USER” in Step

Press the “ENTER” button.

Select “WHITE BALANCE HIGH” or
“WHITE BALANCE LOW” with the
buttons.

• All colors will not be displayed properly unless adequate adjustment is made.

If the adjustment is not successful, press “STD” (standard) button when the individual adjustment
screen is displayed to restore the factory default setting only for the displayed item.

• The color temperature cannot be adjusted for the internal test pattern (refer to page 81). Be sure to

project the input signal when adjusting the color temperature.

• If the color matching is set to “USER”, the color temperature will be fixed to “USER”.

Note

Press “ENTER” button.

The WHITE BALANCE HIGH (LOW) screen will be
displayed.

Select “R”, “G” or “B” with the
buttons.

Adjust the level with the

buttons.

R (Red)

Deepens red.

Weakens red.

Deepens green.

Weakens green.

Deepens blue.

Weakens blue.

G (Green)

B (Blue)

Maximum value 255
Minimum value 0

WHITE BALANCE HIGH
R

255

:MENU SELECT
:ADJUST

Press button

Item

Adjustment Remarks

Operation

Adjusting the color temperature

Adjustment procedure (to be performed while projecting the signals to be adjusted)

Press button