Panasonic PT-EW530U Manual De Usuario

J

If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, 

click the part to display the details of the error.

Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.

• 

                  

When [FAILED] has appeared for an item

MAIN CPU BUS

Trouble has occurred in the microcomputer circuitry. Consult your dealer.

FAN

Trouble has occurred in the fan or its drive circuit. Consult your dealer.

INTAKE AIR TEMPERATURE

Intake air temperature is high. It could be because it is used in an environment of high 

temperature such as close to a heating device, etc., the air intake is blocked, or the air 

filter is clogged.

AROUND LAMP TEMPERATURE

The temperature around the lamp is too high. Exhaust may be blocked, or [Fan control] 

mode may be set wrong. See [Fan control] of the Functional Manual. (

Æ

page 66)

OPTICS MODULE TEMPERATURE

Optics module temperature is high. The exhaust air port maybe blocked or the air filter 

is clogged.

LAMP REMAIN TIME

The lamp runtime has exceeded the prescribed cumulative time, and it is now time to 

replace the lamp.

LAMP STATUS

The lamp has failed to light.

Wait a short while for the lamp to cool off, and then turn on the power.

APERTURE(CONTRAST-SHUTTER)

Trouble has occurred in the contrast shutter circuitry. Consult your dealer.

SHUTTER

There is a problem with shutter.

AIR FILTER

There is a problem with the air filter unit.

FILTER UNIT

The air filter unit is not installed.

J

 Displays the current configuration information of the network.



OK:

      Normal operation

FAILED :     Occurrence of trouble

WARNING: Warning

