Panasonic PT-EX12KU Manual De Usuario

Technical Information

102 - ENGLISH

Appendix

6) Then use [Lens shift] to overlap the shaded areas.

■

The red line will turn yellow if it is overlapped correctly.

Line (yellow)

Frame (green): Projected image

Exit

Edge blending

All

Left

Right

Top

Bottom

Black level

Test pattern
Menu off

Start
Width
Start
Width
Start
Width
Start
Width
All

Reset

Back

Move

Back

Exit

Edge blending

All

Left

Right

Top

Bottom

Black level

Test pattern
Menu off

Start
Width
Start
Width
Start
Width
Start
Width
All

Reset

Back

Move

Back

7) Turn [Test pattern] to [On] to display a 50% white test pattern.

■

The overlapping areas will be displayed more brightly than other areas.

8) Adjust [Black level] so that there is no difference between the overlapping areas and

other areas.

■

To adjust the overlapping areas, setting a smaller value to the [Contrast] in the [Image adjust] menu is

recommended.

If the left and right colors do not match, proceed to the following step.

■

■[Color matching]

9)  Select [Color matching] in the [Setting] menu and display the setting screen.
10)  Turn on color matching with [On] and adjust [Red]/[Green]/[Blue]/[White].
11)  Select [Advanced color matching] if more detailed settings are required, and display

the setting screen.

12) Turn on advanced color matching with [On] and adjust each color with [Target].

■

Set the [Target] value to within the [Measured] value range.

$GYDQFHGFRORUPDWFKLQJ

0HDVXUHG

7DUJHW

$XWRWHVWSDWWHUQ

0HQXRII

)DFWRU\GHIDXOW

7HVWSDWWHUQ

6WRUH

5HVHW

%DFN

,QIRUPDWLRQ

2II

5HG
*UHHQ
%OXH

5HG
*UHHQ
%OXH
&\DQ
0DJHQWD
<HOORZ
:KLWH

([LW

%DFN

1H[W

0RYH

Example) Value for “[Red], x”

“[Measured] = 0.674”, so [Target] is set to a smaller value

of “0.650”.

13) If the colors do not match even after adjusting [Target], use a colorimeter to

measure the chromaticity coordinates and luminance to make further adjustments.