Panasonic PT-EX12KU Manual De Usuario

■

■[Effect]

Sets special effects when shutter is opened and 

closed.

2)  Press ▲▼ to switch the setting.

Does not set special effects.

Sets fade in and fade out when the 

shutter is opened and closed.

Sets slower fade in and fade out 

than L1.

■

■[Release key]

Sets the release button when shutter is closed.

2)  Press ▲▼ to switch the setting.

The shutter function is canceled by 

pressing any button on the remote 

control or projector body, and the 

function of the pressed button is 

executed.

Only the <SHUTTER> button on the 

remote control or the control panel 

can be canceled.

■

z

If the power is turned on again after the power is 

turned off during the setting or the lamp is turned off 

with the [Management] setting, the shutter function 

is canceled.

■

z

The setting of the selected item is enabled.

■

■[Management]

Sets a time between closing of the shutter and the 

lamps turning off.

2)  Press ▲▼ to select.

■

z

You can set times from 5 - 480 minutes.

■

z

When the management function is active, the lamp 

is turned off and the projector will begin a cooling 

operation.

■

z

When cooling has finished, the power of the 

projector body is turned off and the standby 

indicator <STANDBY> turns on.

■

z

The shutter indicator <SHUTTER> begins flashing 

in blue as the cooling operation begins.

■

z

The flashing continues after the cooling has 

finished and the standby indicator <STANDBY> has 

turned on.

■

z

The flashing stops when the projector power is 

turned on again.

■

z

The power management function does not work 

when the image is blocked by the [Shutter].

■

z

The factory default setting is “180 minutes”.

■

z

You can set the time while the function cannot be 

set to off.