Panasonic PT-RW430UK Manual De Usuario

Chapter 4 Settings — [NETWORK] menu

104 - ENGLISH

When [Error (Detail)] appears in the self-diagnosis display of the 

[Projector status] screen, click it to display the error details.

 

f

The projector may go into the standby status to protect the projector depending on the contents of the error.

1

Displays the item check results.

Indicates that operation is normal.

Indicates that there is a problem.

Indicates that there is a warning.

r

[MAIN CPU BUS]

There is a problem with the microcomputer circuitry. Consult your dealer.

[FAN]

There is a problem with the fan or the fan drive circuit. Consult your dealer.

[INTAKE AIR TEMPERATURE]

The air intake temperature is too high. The projector may be used in an operating 

environment where the temperature is high, such as near a heating appliance.

[OPTICS MODULE TEMPERATURE]

The temperature around the optics module inside the projector is high. The projector 

may be used in an operating environment where the temperature is high, such as near a 

heating appliance.

[INTERNAL AIR TEMPERATURE]

The temperature inside the projector is high. The projector may be used in an operating 

environment where the temperature is high, such as near a heating appliance.

[LIGHT STATUS]

The light source failed to turn on or off. Wait a while until the light source cools off, and 

then turn on the power.

[INTAKE AIR TEMP.SENSOR]

There is a problem with the intake temperature detection sensor. Consult your dealer.

[OPTICS MODULE TEMP.SENSOR]

There is a problem with the temperature detection sensor around the optics module 

inside the projector. Consult your dealer.

[INTERNAL AIR TEMP.SENSOR]

There is a problem with the sensor used to detect temperature inside the projector. 

Consult your dealer.

[BATTERY]

Replacement of built-in battery is required. Consult your dealer.

[PHOSPHER WHEEL]

There is a problem with the fluorescent wheel or fluorescent wheel drive circuit. Consult 

your dealer.