NEC M260X Manual De Usuario

2. Projecting an Image (Basic Operation)

Standby

Blinking

Power On

Steady orange light

Blinking blue light

Steady blue light

 Turning on the Projector

1. Uncover the lens by sliding the lens cover (M350X/

M300X/M260X/M230X/M300W/M260W/M420X/M420XV)
or removing the lens cap (M350XS/M300XS/M260XS/
M300WS/M260WS)

[M350XS/M300XS/M260XS/M300WS/M260WS]

• Do not remove the lens cap by pulling on the string.

Doing so can cause mechanical damage to the part
around the lens.

2. Press the

(POWER) button on the projector cabinet

or the POWER ON button on the remote control.

The POWER indicator will turn to blue and the projector

will become ready to use.

TIP:

• When the message “Projector is locked! Enter your password.”

is displayed, it means that the [SECURITY] feature is turned on.

(

→ page

After you turn on your projector, ensure that the computer

or video source is turned on and that the lens cover is
open.

NOTE: When no input signal is present, the no-signal guidance is

displayed (factory menu setting).

(

→ page

)

Lens cover

Lens cap