Compaq 8000 Series Manual De Usuario

 

    user’s guide 

• 

To release an optical drive or diskette drive from the chassis of the 8000 
series, slide the drive lock mechanism (1) to unlock the drive in the drive 
bay and pull the drive out of the drive bay (2). 

   

 

• 

To release a hard disk drive from the chassis of the 8000 series, slide the 
drive lock mechanism (1) to unlock the drive in the drive bay, remove the 
metal drive shield (2) by pressing and lifting the two tabs on one side of the 
shield, and then pull the drive out of the drive bay (3). 

   

 

5 For both the S0000 and 8000 series, if you are replacing the old drive with a 

new drive, remove the four screws (4) (two on each side) from the old drive. 
You need these screws to install the new drive. 

 If you have the S0000 series, and you removed a 7-In-1 memory card 

reader, continue to step 7; otherwise, you are finished with the task of 
removing a drive from the chassis. 

If you have the 8000 series, and you removed a hard disk drive, a 7-In-1 
memory card reader or an optical drive, you are also finished with this task. If 
you have the 8000 series, and you removed a diskette drive, continue to 
step 6.